Stone Coat Countertop Thickener is an additive for Quick Coat and Countertop resins in situations where a thickened resin mix is required, as in filling voids or for the application of resin on vertical surfaces.

About Quick Coat and the use of this additive thickener: 

Quick Coat is designed to fill seams, gaps, cracks, and small voids.  This is a Zero VOC product and can be sanded in 3 hours in a  24C [75F] temperature climate. Quick Coat has a 15 minute working time and is a multi-functional product. We use it to embed steel bars in woods slabs, fill in cracks and knot holes, and seal live edges for our woodworking projects. You can also use it as an adhesive to connect and seam MDF countertops together.  You can use our Metallic Powders to colour and tint Quick Coat. Mix a 1:1 ratio of Part A and Part B for 2 minutes with a drill, then add the thickener if needed. Voids that go all the way through a piece or seams should be thickened. The more thickener you use the less runny the Quick Coat will be.  Only mix up enough product for the area needed, and work quickly. For large voids and river tables we recommend using our Stone Coat Casting Epoxy. When adding the thickening powder, it's light weight and floats around in the air, so be sure to wear a mask.

When adding the thickening powder to Quick Coat, the epoxy will cure milky white, you can tint the thickened Quick Coat with our metallic powders to your desired colour.

***The epoxy thickener is CAB-O-SIL, This product should be applied using a respirator, it's very fine and will float in the air.***