PRODUCT INFORMATION

To completely fill the mould you will need approximately 1.2 litres of resin.

Internal measurement: Approximately 15cm x 15cm (base) x 15cm (height).

Note: It is good practice to apply mould release spray when using resin moulds.

Please note that due to the size of the mould additional shipping costs may be incurred. Customers will be advised prior to shipment if this is the case.

Care Instructions

·      Clean with non-abrasive mild soapy water. Cleaning with solvents may cause the mould to become brittle and crack.

·      Do not apply direct heat to the mould as this may cause it to lose structural integrity and melt. Application of heat from a torch or heat gun should be carefully directed at the poured resin and not the mould.

·      Avoid the use of tools that will scratch or puncture the mould.

·      Store in a dry location away from direct sunlight.