Casting Epoxy - Stone Coat Countertops Australia
Casting Epoxy - Stone Coat Countertops Australia
Stone Coat Countertops - Casting Epoxy
5.68 litre (1.5 Gallon) resin - $250 [Australia ONLY]
**This Casting Epoxy is designed to be poured over 19.05 mm [3/4''] per pour**
5.68 litre kit [1.5 Gallon] This material is designed to fill large voids in raw wood slab tops. Stone Coat Casting resin is unique because normal Stone Coat can only be poured in thickness of 3.175 mm [1/8"] per coat. Stone Coat Casting resin can be poured up to 19 - 25.4 mm [0.75 - 1"] thick depending on the size and mass of your project. This product is designed to be slow curing so heat will not be generated and "over cook" the epoxy. Make sure and use a normal Stone Coat flood coat over the top of Stone Coat casting resin because you'll need the scratch protection. Stone Coat Casting resin is not designed as the final coat. This product is NOT to be used for normal 3.175 mm [1/8"] flood coat pour. This is a 5.68 litre [1.5 gallon] kit mixed at 2:1 Mix this material slowly with a paint stick not a drill, then when trying to pop bubbles pop them as you pour 6.35 mm [1/4"] at a time then add more material and continue to torch as you go to get a crystal clear deep pour. For stubborn areas heat the tip of a screwdriver and pop the deep bubbles with the hot tip of the screwdriver.
We do not recommend pouring large clear areas that you want to remain crystal clear. Our casting epoxy is great to tint and keep translucent but avoid large thick areas that you want to remain crystal clear as they may show some amber tint due to the nature of this formulation.
If this product is out of stock please contact us to be advised when it will next be available - info@colourobsession.com.au
Follow this link for Step-by-Step Project Recipes: https://www.stonecoatcountertops.com/tips-and-tricks
Free video training: https://www.stonecoatcountertops.com/free-training-how-to-videos
An important part of using Casting Epoxy is to keep it from getting hot and overheating the epoxy. When pouring large masses of material you may still consider doing this in multiple steps. The Super Cast is designed to be poured thick and works amazingly for river tables and thick pours, however large voids or extensions to tables can cause the product to self generate heat and fail. Unexperienced folks should error on the side of caution and pour multiple pours. Excess Moisture in the substrate and humidity will cause the epoxy to set off and heat up. When Super Cast is used in small masses it will slow the drying time but it will still cure.
We do not recommend pouring large clear areas that you want to remain crystal clear unless you have tested the thickness and clarity you desire on a smaller test project. You can use our metallic powder additives, glitter, mica, or base colour tints to colour and tint this product.
***AUSTRALIA ONLY***
Casting Epoxy - Stone Coat Countertops - watch the video:
Watch how to use this product to create a fantastic live edge river table:
